We are one of the world's largest manufacturers of honeycomb panels.
Providing innovative solutions for the world’s most crucial industries.
An extensive collection of documents, here at your fingertips.
Dive deeper into The Gill Corporation.
Collaborating across continents to provide innovative composite solutions.
PAA-CORE® 5052 aluminum honeycomb is phosphoric acid anodized and coated with a proprietary primer. PAA-CORE® has unsurpassed corrosion resistance, (with minimal weight loss after 31 days in an acidified salt spray chamber). PAA-CORE® outperforms non-metallic core materials due to significantly higher strength-to-weight ratio and hot/wet strength.
Standard | Maximum | Tolerance | ||||
---|---|---|---|---|---|---|
inches | mm | inches | mm | inches | mm | |
Ribbon (L) | 48 | 1219 | 100 | 2540 | +2.0 / -0.0 | +50.8 / -0.0 |
Transverse (W) | 96 | 2438 | 144 | 3658 | +4.0 / -0.0 | +101.6 / -0.0 |
Thickness (T) | 35 | 889 | ||||
up to 4 inches (102mm) T | ±0.005 | ±0.127 | ||||
over 4 inches (102mm) T | ±0.062 | ±1.575 | ||||
Density | see mechanical characteristics chart | ±10% | ||||
Cell Size | see mechanical characteristics chart | ±10% |
Substrate: 5052 aluminum
Coating: PAA primer coating
When ordering, please specify PAA-CORE® 5052 using the following format:
Example: PAA – 5052 – 3.1 – 3/16 – N – E, where
Product | Alloy | Density | Cell Size | Perforated or Non-Perforated | Expanded or Unexpanded |
---|---|---|---|---|---|
PAA | 5052 | 3.1 | 3/16 | P or N | E or U |
Mechanical Characteristics (Typical Values – US units) | |||||||||
---|---|---|---|---|---|---|---|---|---|
Stabilized Compressive Strength | Crush Strength | Shear Strength | Shear Modulus |
||||||
lbs/ft3 – inches – inches | psi | psi | psi | ksi | |||||
L | W | L | W | ||||||
75° F | 350° F | 75° F | 75° F | 350° F | 75° F | 350° F | 75° F | ||
3.1 – 1/8 – .0007 | 305 | 200 | 145 | 215 | 145 | 132 | 90 | 32 | 16 |
4.5 – 1/8 – .0010 | 580 | 380 | 270 | 345 | 240 | 225 | 150 | 51 | 25 |
6.1 – 1/8 – .0015 | 1030 | 660 | 450 | 565 | 400 | 345 | 220 | 77 | 37 |
8.1 – 1/8 – .0020 | 1575 | 1075 | 760 | 810 | 575 | 540 | 310 | 112 | 50 |
10.0 – 1/8 – .0025 | 1875 | 1300 | 1070 | 1075 | 810 | 610 | 415 | 140 | 60 |
12.0 – 1/8 – .0030 | 2920 | 1550 | 1400 | 1955* | 1300* | 950* | 440 | 160 | 75 |
2.6 – 5/32 – .0007 | 245 | 150 | 105 | 170 | 110 | 102 | 80 | 24 | 12 |
3.8 – 5/32 – .0010 | 415 | 280 | 210 | 275 | 200 | 168 | 140 | 41 | 20 |
2.0 – 3/16 – .0007 | 180 | 100 | 70 | 122 | 80 | 71 | 65 | 17 | 9 |
3.1 – 3/16 – .0010 | 340 | 200 | 145 | 215 | 145 | 128 | 90 | 32 | 16 |
4.4 – 3/16 – .0015 | 555 | 375 | 270 | 335 | 235 | 220 | 145 | 50 | 24 |
5.7 – 3/16 – .0020 | 870 | 600 | 410 | 465 | 380 | 305 | 200 | 70 | 34 |
6.9 – 3/16 – .0025 | 1185 | 780 | 570 | 600 | 500 | 380 | 275 | 91 | 42 |
8.1 – 3/16 – .0030 | 1735 | 1075 | 760 | 735 | 575 | 490 | 310 | 112 | 50 |
2.3 – 1/4 – .0010 | 215 | 125 | 85 | 145 | 90 | 88 | 70 | 21 | 11 |
3.4 – 1/4 – .0015 | 375 | 235 | 160 | 235 | 160 | 145 | 100 | 35 | 18 |
4.3 – 1/4 – .0020 | 545 | 365 | 250 | 325 | 235 | 205 | 140 | 48 | 24 |
5.2 – 1/4 – .0025 | 770 | 500 | 330 | 415 | 330 | 270 | 160 | 62 | 31 |
6.0 – 1/4 – .0030 | 1110 | 650 | 430 | 535 | 390 | 350 | 210 | 75 | 36 |
7.9 – 1/4 – .0040 | 1505 | 1025 | 720 | 710 | 550 | 450 | 300 | 108 | 49 |
1.6 – 3/8 – .0010 | 98 | 70 | 50 | 88 | 60 | 51 | 35 | 13 | 6 |
2.3 – 3/8 – .0015 | 205 | 125 | 85 | 145 | 90 | 88 | 70 | 21 | 11 |
3.0 – 3/8 – .0020 | 315 | 190 | 135 | 205 | 140 | 128 | 85 | 30 | 15 |
3.7 – 3/8 – .0025 | 415 | 265 | 200 | 255 | 190 | 165 | 105 | 40 | 20 |
4.2 – 3/8 – .0030 | 565 | 340 | 240 | 315 | 230 | 205 | 130 | 47 | 23 |
5.4 – 3/8 – .0040 | 810 | 540 | 360 | 435 | 355 | 285 | 180 | 66 | 32 |
6.5 – 3/8 – .0050 | 1015 | 750 | 510 | 555 | 440 | 360 | 265 | 83 | 40 |
4.0 – 1/2 – .0040 | 400 | 320 | 220 | 290 | 220 | 170 | 120 | 44 | 22 |
For minimum values, please see AMS-C-7438. *Beam Shear
Mechanical Characteristics (Typical Values – SI/metric units) | |||||||||
---|---|---|---|---|---|---|---|---|---|
Stabilized Compressive Strength | Crush Strength | Shear Strength | Shear Modulus |
||||||
lbs/ft3 – inches – inches | MPa | MPa | MPa | MPa | |||||
L | W | L | W | ||||||
23° C | 177° C | 23° C | 23° C | 177° C | 23° C | 177° C | 23° C | ||
3.1 – 1/8 – .0007 | 2.10 | 1.38 | 1.00 | 1.48 | 1.00 | 0.91 | 0.62 | 221 | 110 |
4.5 – 1/8 – .0010 | 4.00 | 2.62 | 1.86 | 2.38 | 1.65 | 1.55 | 1.03 | 352 | 172 |
6.1 – 1/8 – .0015 | 7.10 | 4.55 | 3.10 | 3.90 | 2.76 | 2.38 | 1.52 | 531 | 255 |
8.1 – 1/8 – .0020 | 10.86 | 7.41 | 5.24 | 5.58 | 3.96 | 3.72 | 2.14 | 772 | 345 |
10.0 – 1/8 – .0025 | 12.93 | 8.96 | 7.38 | 7.41 | 5.58 | 4.21 | 2.86 | 965 | 414 |
12.0 – 1/8 – .0030 | 20.13 | 10.69 | 9.65 | 13.48* | 8.96* | 6.55* | 3.03* | 1103 | 517 |
2.6 – 5/32 – .0007 | 1.69 | 1.03 | 0.72 | 1.17 | 0.76 | 0.70 | 0.55 | 165 | 83 |
3.8 – 5/32 – .0010 | 2.86 | 1.93 | 1.45 | 1.90 | 1.38 | 1.16 | 0.97 | 283 | 138 |
2.0 – 3/16 – .0007 | 1.24 | 0.69 | 0.48 | 0.84 | 0.55 | 0.49 | 0.45 | 117 | 62 |
3.1 – 3/16 – .0010 | 2.34 | 1.38 | 1.00 | 1.48 | 1.00 | 0.88 | 0.62 | 221 | 110 |
4.4 – 3/16 – .0015 | 3.83 | 2.59 | 1.86 | 2.31 | 1.62 | 1.52 | 1.00 | 345 | 165 |
5.7 – 3/16 – .0020 | 6.00 | 4.14 | 2.83 | 3.21 | 2.62 | 2.10 | 1.38 | 483 | 234 |
6.9 – 3/16 – .0025 | 8.17 | 5.38 | 3.93 | 4.14 | 3.45 | 2.62 | 1.90 | 627 | 290 |
8.1 – 3/16 – .0030 | 11.96 | 7.41 | 5.24 | 5.07 | 3.96 | 3.38 | 2.14 | 772 | 345 |
2.3 – 1/4 – .0010 | 1.48 | 0.86 | 0.59 | 1.00 | 0.62 | 0.61 | 0.48 | 145 | 76 |
3.4 – 1/4 – .0015 | 2.59 | 1.62 | 1.10 | 1.62 | 1.10 | 1.00 | 0.69 | 241 | 124 |
4.3 – 1/4 – .0020 | 3.76 | 2.52 | 1.72 | 2.24 | 1.62 | 1.41 | 0.97 | 331 | 165 |
5.2 – 1/4 – .0025 | 5.31 | 3.45 | 2.28 | 2.86 | 2.28 | 1.86 | 1.10 | 427 | 214 |
6.0 – 1/4 – .0030 | 7.65 | 4.48 | 2.96 | 3.69 | 2.69 | 2.41 | 1.45 | 517 | 248 |
7.9 – 1/4 – .0040 | 10.38 | 7.07 | 4.96 | 4.90 | 3.79 | 3.10 | 2.07 | 745 | 338 |
1.6 – 3/8 – .0010 | 0.68 | 0.48 | 0.34 | 0.61 | 0.41 | 0.35 | 0.24 | 90 | 41 |
2.3 – 3/8 – .0015 | 1.41 | 0.86 | 0.59 | 1.00 | 0.62 | 0.61 | 0.48 | 145 | 76 |
3.0 – 3/8 – .0020 | 2.17 | 1.31 | 0.93 | 1.41 | 0.97 | 0.88 | 0.59 | 207 | 103 |
3.7 – 3/8 – .0025 | 2.86 | 1.83 | 1.38 | 1.76 | 1.31 | 1.14 | 0.72 | 276 | 138 |
4.2 – 3/8 – .0030 | 3.90 | 2.34 | 1.65 | 2.17 | 1.59 | 1.41 | 0.90 | 324 | 159 |
5.4 – 3/8 – .0040 | 5.58 | 3.72 | 2.48 | 3.00 | 2.45 | 1.97 | 1.24 | 455 | 221 |
6.5 – 3/8 – .0050 | 7.00 | 5.17 | 3.52 | 3.83 | 3.03 | 2.48 | 1.83 | 572 | 276 |
4.0 – 1/2 – .0040 | 2.76 | 2.21 | 1.52 | 2.00 | 1.52 | 1.17 | 0.83 | 303 | 152 |
For minimum values, please see AMS-C-7438. *Beam Shear
This product is safe to use and apply when recommended precautions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions and first aid recommendations. For industrial use only. Keep away from children. Additional information can be found at: www.thegillcorp.com. For sales and ordering information call 1-626-443-6094.
All recommendations, statements, values and technical data herein are based on tests The Gill Corporation believes to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. Users shall rely on their own information and tests to determine suitability of the product for the intended use and assume all risks and liability resulting from their use of the product. The Gill Corporation’s sole responsibility shall be to replace that portion of the product that proves to be defective. The Gill Corporation will not be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements not contained in a written agreement signed by an officer of The Gill Corporation shall not be binding upon The Gill Corporation. Alcopan™, Alphex®, CGH® Dura-Core®, Gillfab®, Gillfloor®, Gilliner®, Gillite®, Gillfists®, GillVANA®, Higrid®, Hushgrid®, PAA-Core®, Plygrid®, Shapegrid®, Strikegrid®, Trussgrid® are registered trademarks of The Gill Corporation.
The Gill Corporation
4056 Easy Street
El Monte, CA 91731-1087
USA
P +1 (626) 443-6094
E info@thegillcorp.com